welcome to all we’re going to see a
small presentation on Anabond Anaerobic Thread Locking
adhesives and Sealants bolts and nuts loosen due to vibration and this has been a problem for the
Engineer along the ages. Various devices have been used to to stop this like spring washers, wave
washers, nylon ring nuts they have proved futile. Anaerobic Adhesives from Anabond have been proved to be the best locking devices known to the industry today. Let me show you how We will now use Anabond Thread Locker Anabond 113 on these M10 bolts
and nuts of 8.8 grade. Since we proposed to dispense the adhesive through a dispenser, we will fill the adhesive in this plastic barrel of the dispenser. While adhesive can be dispensed manually, a simple dispenser like this model PAD-001 ensures accurate and easy application of the adhesive. Now I take the bold and dispense a drop of adhesive onto the
bolt. and turn the nut on the bolt. Let’s now Keep it aside… …another one… one more drop… Turn the nut. There it is. Now we’re ready for keeping these bolts for curing for about 3 hrs time and we will check it after the Curing. Now let us clamp these bolts on to bench wise. I use an electronic torque wrench to check the torque. Let’s see what is the torque reading of this torque wrench. 4 3.2 newton meter of torque! From this we understand that use of Anabond Anaerobic Thread locking adhesives ensures failsafe fastener assemblies for your engineering machines. They do this by 1. locking the fasteners and 2. sealing the threads against corrosion. Thank you for your time. Thank you.